Hifolks, I have a MK2.5 Focus, 1.6 TDCi from 2010. It's the pre-DPF model. It has developed recently an annoying fault, whereby when I am driving along regardless of speed or engine load. The centre screen pops up with 'Engine Malfunction!' when it does this the car makes the alarm noise like yo
10 Name: Paul. Ford Model: Focus 2.0 TDCI Titanium. Ford Year: 2009. UK/Ireland Location: Suffolk. Posted December 30, 2018. Good morning, i have had an ongoing issue for the last month with starting and running issues with my 2009 Focus Titanium. I've had the car since it was 3 months old and up until the end of november it
Mycluster started to chime, displaying the messages ā€œengine malfunction - acceleration reducedā€ however this was very intermittent. Ford Model: 1.8 TDCI Mk2 Focus Ford Year: 2006 UK/Ireland Location: Dorset Share; Posted February 13, 2019. 22 minutes ago, LTIronWolf said:
GroundStrap Corrosion. One of the most common issues with the Ford Focus 1.6 TDCI is ground strap corrosion. Some mechanics primarily blame the problem on the default placement of the ground strap by Ford. Regardless of the cause, this can lead to several symptoms, including engine misfires, rough idling, loss of power, and poor fuel
FordModel: Focus tdci 2.0 Ford Year: 2009 UK/Ireland Location: Yorkshire Share; Posted April 18, 2022. Hi thank you so uch for this info.i have an experience with my ford focus TDCI 2009 earlier. I was driving on an uphil on a hot afternoon and the squilgly light came on and the dash says engine malfunction, i drove bavk home, turn the car off
Slightlymore room with the fan gone! Next remove the temp sensor. 19mm nut. Pressure pipes -. Then the heatshield, 10mms. All clear, finally see the DPF itself! Remove the rear bolts - try not to round them lol. Remove V band clamp on turbo, and 10mm nuts securing DPF can to the engine.
FORDMONDEO 2 LTR. HDI DIESEL 2008 Hi Guys l to have had/have this problem. l took the car to Fords who duly came up with one code and told me it was the throttle body l replaced this at a cost of close to Ā£400 used the car on and off no problem, Went to Yorkshire some touring around car ran fine on the return journey back about
FordFocus 'Engine malfunction' warning - caused by stored fault codes P0607 and P2110. This Ford Focus engine ECU is a very common failure for vehicles built between 2004 & 2011 especially for the Ford Focus 1.8 & 2.0 litre models built in 2007, failure will cause intermittent misfires, poor/rough running and activation of the 'limp-mode' function. 14posts Ā· Joined 2011. #14 Ā· Aug 8, 2012. So, this is the story of my case. 1 Year ago it showed me this Engine Malfunction and the ESP light, because it was the first time and I didn't knew what to do I stopped the engine and towed the car to the local Ford dealer. They checked it and found nothing wrong with the car. 6yco.
  • qzy11x5phx.pages.dev/40
  • qzy11x5phx.pages.dev/404
  • qzy11x5phx.pages.dev/358
  • qzy11x5phx.pages.dev/465
  • qzy11x5phx.pages.dev/484
  • qzy11x5phx.pages.dev/475
  • qzy11x5phx.pages.dev/395
  • qzy11x5phx.pages.dev/52

    • 2009 ford focus 1.6 tdci engine malfunction